Understanding Stainless Steel Wire Types for Springs
Updated: Oct 21

Which Stainless Steel Is Best for Springs?
The best stainless-steel wire for a spring depends on the operating environment, required tensile strength, temperature, fatigue expectations and manufacturing process. Type 302 or 304 is commonly selected for general corrosion resistance and dependable spring performance. Type 316 is better suited to applications involving saltwater, chemicals or more aggressive corrosion. Type 17-7 PH may be preferred when the design requires higher strength, better stress resistance or elevated-temperature performance.
Stainless Steel Spring Wire Comparison
302/304 stainless steel
Best suited for: General industrial, food equipment, appliance and outdoor applications
Primary advantage: Good balance of corrosion resistance, formability and spring properties
Consideration: Less corrosion-resistant than 316 in chloride or chemical environments
316 stainless steel
Best suited for: Marine, chemical-processing, washdown and high-moisture environments
Primary advantage: Improved resistance to pitting and corrosion
Consideration: Lower tensile strength and typically higher material cost than 302/304
17-7 PH stainless steel
Best suited for: High-stress, high-cycle and elevated-temperature applications
Primary advantage: High strength and strong fatigue-performance potential after appropriate heat treatment
Consideration: Processing and heat-treatment requirements must be considered during design and quoting
Common Applications for Stainless Steel Springs
Stainless-steel springs are frequently specified when a component will encounter moisture, cleaning processes, outdoor exposure or corrosive materials.
Type 302/304 may be used in appliance controls, food-processing equipment, outdoor power equipment, industrial enclosures and general-purpose mechanisms.
Type 316 may be appropriate for marine equipment, chemical-handling systems, washdown environments, coastal applications and components exposed to chlorides.
Type 17-7 PH may be considered for aerospace components, high-cycle industrial mechanisms, demanding valve applications and assemblies operating at temperatures or stresses beyond the practical range of general-purpose stainless wire.
These examples are general guidelines. Final material selection should be based on the spring geometry, operating stress, environment and required cycle life.
Manufacturing Considerations for Stainless Steel Springs
Stainless-steel wire behaves differently from carbon-steel spring materials during coiling, forming and heat treatment. Spring manufacturers must account for material strength, springback, tooling wear, bend severity and the required stress-relief or precipitation-hardening process.
The design review should evaluate wire diameter, mean coil diameter, spring index, number of active coils, end configuration and expected deflection. Tight bends, aggressive stress levels and insufficient allowances for springback can make a design more difficult to manufacture consistently.
Material availability should also be confirmed early. Less common wire diameters or alloys may affect lead time, minimum order quantities and overall project cost.
How Stainless Steel Springs Are Inspected
Inspection requirements depend on the spring type and application. Common checks include wire diameter, free length, coil diameter, squareness, load at a specified height, torque, leg position and dimensional conformance to the approved drawing.
For corrosion-sensitive or highly regulated applications, customers may also require material certifications, lot traceability, passivation, cleanliness requirements or application-specific testing. Southern Precision Spring’s ISO 9001:2015 quality system supports documented manufacturing and inspection processes for custom spring programs.
Delving into the world of stainless steel wires, we find four prominent types often utilized in the spring industry. While most stainless-steel wire is a combination of 70% iron with the remaining 30% consisting of Chromium, Nickel, and other alloys, each type has unique properties.
1. Stainless 302/304:
Often termed as "18/8" stainless, this signifies its composition of 18% Chromium and 8% Nickel.
Renowned for its durability, ductility, and commendable corrosion resistance.
A notable difference: Type 304 has a marginal reduction in carbon content compared to 302, enhancing corrosion resistance but slightly reducing tensile strength. This often allows 302 to replace 304 where superior corrosion resistance isn't crucial.
2. Stainless 316:
Boasts a heightened resistance to corrosion due to its increased molybdenum and nickel content compared to 302/304.
However, its tensile strength is somewhat lower than 302/304.
3. Stainless 17-7:
Comprises 17% Chromium and 7% Nickel, with a crucial 1% addition of aluminum.
This variant can endure surface temperatures about 180-200°F more than the 302/304 types and possesses a far superior tensile strength compared to 302/304/316.
Stainless Steel Production & Costs: Several redraw mills in the US produce stainless-steel wire from rod stock. With North American Stainless (NAS) leading as the primary rod producer, they play a pivotal role in determining the stainless-steel wire market price. It's also noteworthy that a significant volume of stainless steel is imported from Europe and Korea.
Unique to stainless steel is a fluctuating "tax" or surcharge, predominantly influenced by the market prices of nickel, chromium, molybdenum, and iron, with nickel being the most significant price driver.
Given the premium costs associated with Stainless Steel – one of the most expensive materials used at Southern Precision Spring – we're consistently vigilant about market dynamics affecting its price.
Need Help Selecting Stainless Steel Wire for a Custom Spring?
Southern Precision Spring can review your application environment, load requirements, cycle expectations and drawing specifications to help identify an appropriate spring material. Submit your drawing or project requirements for an engineering and manufacturability review.




